Welcome! Register | Sign In

 

 

2024 RC CHILI BOWL RULES

WE WILL BE USING AMB RC4 DECODERS ALONG WITH LIVETIME SCORING SYSTEM

ALL AMB/MYLAPS 2 AND 3 WIRE TRANSPONDERS WILL WORK.

 

 

 NO GYROS OR DRIVING ASSIST DEVICES ALLOWED AT ALL IN ANY CLASSES.

 

SCORING RULES

We use Heat Race point system. The goal is to win your heat race and earn the lowest points possible in 3 rounds of qualifying. A heat race win equals 1 point, 2nd place equals 2 points, 3rd place equals 3 points ect. To set the features, we will add up your points from all 3 qualifiers and we will take the top 6 drivers with the lowest points total. Then bump up drivers from lower features to fill the A Feature. If there is a tie, the first tie break is the racer with the best heat race result. the second tie break is the racer with the best seed time from the seeding round. 

 

Class Order for 2024: Street Stock, Nonwing, MWM, Master Sprint,Late Model, Outlaw Sprint, SC B Mod, SC Mod. *** SUBJECT TO CHANGE ***

 

 TIRES FOR THE 2024 RC CHILI BOWL ARE:

YOU CAN USE ANY COMPOUND OFFERED IN THESE TIRES, YOU MUST USE THE LISTED INSERTS INCLUDED WITH THE TIRES.

***** INSERTS MUST BE RUN AS THEY COME FROM THE MANUFACTUER, THEY CANNOT BE MODIFIED OR ALTERED IN ANYWAY. THEY CANNOT BE TAPED,GLUED OR ATTAHCED TO THE RIM. NO LINERS OR STRAPS OF ANY KIND OR STYLE MAY BE USED INSIDE THE TIRE.  

**** TIRES- YOU ARE NOT ALLOWED TO ALTER OR CUT THE CARCUSS OR SIDEWALL OF THE TIRE. VENT HOLES ARE ALLOWED TO BE PUNCHED IN THE SIDEWALL OF THE TIRE. RACING SURFACE OF THE TIRE MAY BE SANDED OR CLIPPED BUT NO PART OF THE TIRE MAY BE SLICKS.  

 

 

STREET STOCK:              J CONCEPTS SPRINTERS

                                        FRONT: #3134 REAR: #3133

                                        INSERTS: FRONT: #3231 REAR: #3232

 

MIDWEST MODIFIED: PROLINE HOLESHOT 3.0

THESE TIRES COME IN 2 COMPOUNDS. THE -02 IS M3 COMPOUND AND -03 IS M4 COMPOUND. YOU CAN RUN EITHER COMPOUND OR COMBINATION OF COMPOUNDS

                              FRONT: #8290-02  OR #8290-03

                              REAR: #8282-02 OR #8282-03

                              INSERTS COME WITH THE TIRES AND YOU MUST  USE THE INSERTS INCLUDED WITH THE TIRES.

 ***** THERE HAS BEEN SOME VARIENCES IN THE INSIDE RIBS OF THE PROLINE INSERTS THAT HAVE MADE THEM NOT SYMETRICAL. RACERS ARE ALLOWED TO SAND THE INSIDE RIBS OF THE PROLINE INSERTS TO MAKE THEM ROUND. NO OTHER ALTERING OF THE INSERTS IS ALLOWED SUCH AS CUTTING THEM OR PUNCHING HOLES IN THEM. ****

 

LATE MODEL AND PRO LATE MODEL: PROLINE HOLESHOT 3.0.

THESE TIRES COME IN 2 COMPOUNDS. THE -02 IS M3 COMPOUND AND -03 IS M4 COMPOUND. YOU CAN RUN EITHER COMPOUND OR COMBINATION OF COMPOUNDS

                              FRONT: #8290-02  OR #8290-03

                              REAR: #8282-02 OR #8282-03

                              INSERTS COME WITH THE TIRES AND YOU MUST  USE THE INSERTS INCLUDED WITH THE TIRES. 

 ***** THERE HAS BEEN SOME VARIENCES IN THE INSIDE RIBS OF THE PROLINE INSERTS THAT HAVE MADE THEM NOT SYMETRICAL. RACERS ARE ALLOWED TO SAND THE INSIDE RIBS OF THE PROLINE INSERTS TO MAKE THEM ROUND. NO OTHER ALTERING OF THE INSERTS IS ALLOWED SUCH AS CUTTING THEM OR PUNCHING HOLES IN THEM. ****

 

SC B MOD:      DE RACING GROOVED G6T

                        FRONT AND REAR: #DER-G6G 

                        INSERTS: #DER-ISC-CCR

 

SC MODIFIED:       DE RACING GROOVED G6T

                               FRONT AND REAR: #DER-G6G

                               INSERTS: #DER-ISC-CCR

 

WINGLESS SPRINT:         DE RACING OUTLAW SPRINT

                                          FRONT: #DER-OSF1

                                          REAR: #DER-OSR1

                                          INSERTS: FRONT- #DER-ISF-CCR

                                                               REAR- #DER-ISR-CCR

 

MASTERS SPRINT 45+:  J CONCEPTS SPRINTERS

                                        FRONT: #3134 REAR: #3133 any compund

                                        INSERTS: FRONT: #3231 REAR: #3232

 

OPEN SPRINT AND PRO SPRINT: J CONCEPTS SPRINTERS

                                        FRONT: #3134 REAR: #3133 any compound

                                        INSERTS: FRONT: #3231 REAR: #3232

 

 

 

SC MODIFIED

Must be a SC Based Chassis

Carbon fiber chassis allowed. Must meet the following specs. 

All suspension components, transmission, front and rear bulkheads must be on center line of the vehicle

All larger volume OEM Chassis are legal IE “AE,TLR,Traxxas”

Aftermarket or specifically built chassis and kits must conform to the following specifications. 

Maximum Chassis width 7”

Minimum Chassis width 5 1/8” 

Maximum left side of chassis can be from centerline is 3 1/2”

Right side must be a minimum of  2.25” from centerline to outside edge of chassis.

Cages: Must represent a cage, no solid plastic cages, must be cut the same on both sides.

Minimum wheelbase 12.5”

Maximum wheelbase 13.5”

Shock bodies min length 1”

Front Track width Min  11.42”         *UPDATED TO MEET ROAR SPECS*

Front track width Max 11.65”          *UPDATED TO MEET ROAR SPECS*

Front Suspension arms must be equal size left and right

Rear Suspension arms must be equal size left and right

Adjustable Rear Suspension arms are allowed. 

Battery must be mounted on the centerline of the vehicle. Can be either designed front to back or sideways across the chassis but center of battery must be on centerline of chassis. 

MOTORS:

MODIFIED MOTOR

BATTERY:                                                                                                                                                            

2 Cell HARD CASE Lipos. Do not need to be ROAR approved. 8.40 max voltage at Tech Inspection. If 8.45 or highter, you will not be allowed to race that round.

NO GYROS OR DRIVING ASSIST DEVICES ALLOWED.

TIRES:  DE RACING GROOVED G6T 

FRONT AND REAR: #GROOVED G6T-DER-G6T 

INSERTS: #DER-ISR-CCR

 

SC BODY RULES:

Body Length, Width, and Height:
 
13" max body width
 
28" max length (bumper to spoiler)
 
7.5" max body height measured from bottom of chassis
 
 
 
Center deck:
 
1" max deck rake.
 
1" max center deck taper (widest point of the deck can only be 1" wider than the narrowest point of deck)
 
 
Spoiler:
 
1.5" max spoiler height
 
Spoiler end plate max 2” high off center deck and 3.25” long
 
 
Roof:
 
0.5" max roof rake measured from deck
 
Maximum Roof width 9"
 
Maximum Roof length 9"
 
No roof spoilers, a bend down at the trailing edge of the roof is allowed for strength
 
Roof side rails allowed but must have a scale appearance and be on both the left and right sides of the roof.
 
1/4" bend down at the leading edge of the roof allowed.
 
 
 
Roll cage/Roof Supports:
 
Roll cage/roof supports must be cut or formed to resemble a roll cage.  No solid panel roof supports. Window netting and rock guards are allowed.
 
 
Nose:
 
Nose sides can extend a max of 1/4” above the plane of the nose panel
 
Nose sides can extend a max of 1/4” above the plane of the hood panel
 
Nose cannot extend past the inner edges of the front wheels
 
Main nose panel must be a flat plane.  No concave or scooped noses allowed.
 
Rear wheel wells must be cut out to expose most of the rear wheel
 
Left and right windows and sails can be open as long as both sides are the same.

 

SC B MODIFIED:

 

THIS CLASS IS INTENDED FOR BEGINNER TO INTERMEDIATE DRIVERS.

NO SPONSORED RACERS IN THIS CLASS

"SPONSORED MEANS YOU RECEIVED ANY DISCOUNT OR HELP FROM ANY COMPANIES, CHAISSIS,BODIES,ELECTRONICS,TIRES ECT" 

Chassis Allowed:                                                                                                                                                                                                                                                              

Any past or current comercially available mass producted Short Course Truck Produced by manufacuters in our industry . Examples are Traxxas, Team Associated, Team Losi Racing, XRay, HPI and other manufactuers of this level in our industry. No convertions or custom built trucks. Trucks must be run as originally built by above mentioned manufactuers. 

Only options allowed are option parts produced by the original manufacturer and designed and used for intended purpose. You cannot modify the chassis to fit batteries or electronics other than originally designed by manufacturers. No adjustable rear arms or lowered shock towers ect.  

Parts must be used as they are originally intended for the truck. IE no swapping of arms Left on Rigth and Right on Left or Toe Blocks on opposite sides. 

Shocks:   

Original or OEM Brand manufactured Option shocks allowed but must be used in its originally intended configuration. IE- no front shocks on the rear ect. Limiting of the shocks with internal limiters is OK.

Springs:        

They can be from any manufacturer in the RC industry not only OEM.

TIRES: DE Racing Grooved G6T

Front and Rear #DER-G^G

Inserts #DER-ISC-CCR

 

 

SC BODY RULES:

Body Length, Width, and Height:
 
13" max body width
 
28" max length (bumper to spoiler)
 
7.5" max body height measured from bottom of chassis
 
  
Center deck:
 
1" max deck rake.
 
1" max center deck taper (widest point of the deck can only be 1" wider than the narrowest point of deck)
 
 
Spoiler:
 
1.5" max spoiler height
 
Spoiler end plate max 2” high off center deck and 3.25” long
 
 
Roof:
 
0.5" max roof rake measured from deck
 
Maximum Roof width 9"
 
Maximum Roof length 9"
 
No roof spoilers, a bend down at the trailing edge of the roof is allowed for strength
 
Roof side rails allowed but must have a scale appearance and be on both the left and right sides of the roof.
 
1/4" bend down at the leading edge of the roof allowed.
 
 
 
Roll cage/Roof Supports:
 
Roll cage/roof supports must be cut or formed to resemble a roll cage.  No solid panel roof supports. Window netting and rock guards are allowed.
 
 
Nose:
 
Nose sides can extend a max of 1/4” above the plane of the nose panel
 
Nose sides can extend a max of 1/4” above the plane of the hood panel
 
Nose cannot extend past the inner edges of the front wheels
 
Main nose panel must be a flat plane.  No concave or scooped noses allowed.
 
Rear wheel wells must be cut out to expose most of the rear wheel
 
Left and right windows and sails can be open as long as both sides are the same.

                                                                                             

MOTOR:                                                                                                                                   

Open Motor and ESC

TIRES: DE RACING GROOVED G6T 

FRONT AND REAR: GROOVED G6T-DER-G6T REAR

INSERTS: #DER-ISR-CCR

Battery Location: Must be run in the original designed configuration.

BATTERY:  2 Cell HARD CASE Lipos. Do not need to be ROAR approved. 8.40 max voltage at Tech Inspection.  If 8.45 or highter, you will not be allowed to race that round.

NO GYROS OR DRIVING ASSIST DEVICES ALLOWED IN ANY CLASSES. 

Participation: This class is intended for the average racer and to welcome new racers and Kids to the event. NO SPONSORED RACERS ALLOWED IN THIS CLASS. If you have to ask if you are sponsored and allowed to race this class, then you already know the answer. You are more then welcome to run SC Modified.

Final rule: If it does not say you can do it. You cannot . We need an inexpensive, simple class to welcome new racers to the RC Chili Bowl and local race tracks and our hope is this will be the class to make that happen.

 

LATE MODEL:


DODC RULES APPLY- CLICK HERE TO GO TO DIRT OVAL.COM FOR RULES

MOTOR and ESC:
DODC Modified Motor Rules Apply
Any ESC is allowed in any mode.

BATTERY:
2 Cell HARD CASE Lipos. Do not need to be ROAR approved. 8.40 max voltage at Tech Inspection.  If 8.45 or highter, you will not be allowed to race that round.

NO GYRO OR DRIVING DEVICES ALLOWED IN ANY CLASS.

TIRES: PROLINE HOLESHOT 3.0

FRONT: HOLESHOT 3.0 #8290-02 OR #8290-03

REAR: HOLESHOT 3.0 #8282-02 OR #8282-03

INSERTS: MUST USE INCLUDED INSERTS THAT COME WITH HOLESHOT 3.0 TIRES. 

 ***** THERE HAS BEEN SOME VARIENCES IN THE INSIDE RIBS OF THE PROLINE INSERTS THAT HAVE MADE THEM NOT SYMETRICAL. RACERS ARE ALLOWED TO SAND THE INSIDE RIBS OF THE PROLINE INSERTS TO MAKE THEM ROUND. NO OTHER ALTERING OF THE INSERTS IS ALLOWED SUCH AS CUTTING THEM OR PUNCHING HOLES IN THEM. ****

 

OUTLAW SPRINT:


DODC RULES APPLY- CLICK HERE TO GO TO DIRT OVAL.COM FOR RULES

BATTERY:
2 Cell HARD CASE Lipos. Do not need to be ROAR approved. 8.40 max voltage at Tech Inspection.  If 8.45 or highter, you will not be allowed to race that round.


MOTOR and ESC:
DODC Modified Motor Rules Apply
Any ESC is allowed in any mode.

NO GYRO OR DRIVING DEVICE ALLOWED IN ANY CLASS.

TIRES: 

FRONT - J CONCEPTS SPRINTERS #3134 ANY COMPOUND, INSERTS #3231

REAR- J CONCEPTS SPRINTERS #3133 ANY COMPOUND, INSERTS #3232

 

MASTERS OUTLAW SPRINT: 45+ YEARS OLD

PARTICIPANTS MUST BE 45 YEARS OLD BY JAN 8TH 2024

***** MASTERS RACERS WILL NOT BE ALLOWED TO RACE OUTLAW SPRINT CLASS *****

DODC RULES APPLY- CLICK HERE TO GO TO DIRT OVAL.COM FOR RULES

BATTERY:
2 Cell HARD CASE Lipos. Do not need to be ROAR approved. 8.40 max voltage at Tech Inspection.  If 8.45 or highter, you will not be allowed to race that round.


MOTOR and ESC:
DODC Modified Motor Rules Apply
Any ESC is allowed in any mode.

NO GYROS OR DRIVING ASSIST DEVICES ALLOWED. 

TIRES: 

FRONT - J CONCEPTS SPRINTERS #3134 ANY COMPOUND, INSERTS #3231

REAR- J CONCEPTS SPRINTERS #3133 ANY COMPOUND, INSERTS #3232

 

WINGLESS SPRINT:

DODC RULES APPLY- CLICK HERE TO GO TO DIRT OVAL.COM FOR RULES

EXCEPTION TO DODC REAR WIDTH RULE: 11" MAX 

BATTERY:
2 Cell HARD CASE Lipos. Do not need to be ROAR approved. VOLTAGE CHECKED IN TECH FOR 8.40 VOLTS MAX.  If 8.45 or highter, you will not be allowed to race that round.

WEIGHT: 53 OZ.

NO GYROS OR DRIVING ASSIST DEVICES ALLOWED. 

HANDOUT MOTOR-  CLICK HERE - HOBBYWING 13.5 V10 G4R #30401140

ESC: BLINKY MODE

TIRES: DE RACING OUTLAW SPRINT 

FRONT: #DER-OSF1 

REAR: #DER-OSR1 

INSERTS: #DER-ISR-CCR

 

 


MIDWEST MODIFIED:

DODC RULES APPLY: CLICK HERE TO GO TO DIRT OVAL.COM FOR RULES

BATTERY:
2 Cell HARD CASE Lipos. Do not need to be ROAR approved. 8.40 max voltage at Tech Inspection.  If 8.45 or highter, you will not be allowed to race that round.

NO GYROS OR DRIVING ASSIST DEVICES ALLOWED. 


MOTOR and ESC:
DODC MODIFIED MOTOR RULES APPLY

ANY ESC IN ANY MODE

TIRES: PROLINE HOLESHOT 3.0

FRONT: HOLESHOT 3.0 #8290-02 OR #8290-03 

REAR: HOLESHOT 3.0 #8282-02 OR #8282-03

INSERTS: MUST USE INCLUDED INSERTS THAT COME WITH HOLESHOT 3.0

Update 12-7-21 ***** THERE HAS BEEN SOME VARIENCES IN THE INSIDE RIBS OF THE PROLINE INSERTS THAT HAVE MADE THEM NOT SYMETRICAL. RACERS ARE ALLOWED TO SAND THE INSIDE RIBS OF THE PROLINE INSERTS TO MAKE THEM ROUND. NO OTHER ALTERING OF THE INSERTS IS ALLOWED SUCH AS CUTTING THEM OR PUNCHING HOLES IN THEM. ****

 

BODY RULES

MIDWEST MODIFIED BODY RULES

 

STREET STOCK:

THIS CLASS IS INTENDED FOR BEGINNER TO INTERMEDIATE DRIVERS.

NO SPONSORED RACERS IN THIS CLASS

"SPONSORED MEANS YOU RECEIVED ANY DISCOUNT OR HELP FROM ANY COMPANIES, CHAISSIS,BODIES,ELECTRONICS,TIRES ECT" 

CHASSIS RULES:

Any 1/10th scale buggy. Must be a factory based off-road buggy. Associated SR-10 Allowed

Approved manufacturers are Associated, Losi, Traxxas, Schumacher, Kyosho, Durango, Team C, Xray, Yokomo, Hobao H2.

Chassis must remain stock, no aftermarket/non-oem upgrades except RPM Brand parts desinged for the chassis. 

OEM Option parts sold by these companies desiged for their cars are allowed. 

Big Bore and threaded OEM Shocks are allowed.

SPRINGS: They can be from any manufacturer in the RC Industry not only OEM.

Rear wheel drive only.

Mid or rear motor allowed.

Adjustable rear A arms are NOT allowed.

 

Tires:

TIRES: 

J CONCEPTS SPRINTERS

FRONT: #3134  INSERT #3231

REAR:   #3133  INSERT #3232 

MOTOR:                                                                                                                                 Open Motor and ESC

BATTERY:                                                                                                                                                                   2 Cell HARD CASE Lipos. Do not need to be ROAR approved. 8.40 max voltage at Tech Inspection.  If 8.45 or highter, you will not be allowed to race that round.

NO GYROS OR DRIVING ASSIST DEVICES ALLOWED.

 

Body:

Must be closed windowed.

Max 1” Spoiler measured from the deck. No End caps allowed.

Body must include rear bumper. 

Approved Bodies are:

Custom Works - Part #9002,9075

J Concepts - Part #0395

McCallister Racing - Part# 125, 134, 136, 159, 181, 182, 264, 268, 290, 292, 303 ,306, 313, 318, 321,

MR/Kustoms - Part #18SS1W, 17SSPW, 18SS1S, 17SSPS, KlaSSsh-23-KlaSShFAB, 23-KlaSShMC, 23-KlaSShWagon, KlaSSIK-23-KlaSSiKFAB,23-KlaSSiKMC,23-KlaSSiKWagon

Shark RC Bodies - Part #001 - Hammerhead, #002 - Outcast, #003 - Wildcard, #004 - Dawg Pound. #005-Crazy Train, #006 - Shark Attack, #007 - Shark Mafia, #008 Shark Knockout, #009 Shark Ninja. #010 Smoke Screen,